Wednesday, August 30, 2005 at 12:11:22 (CST)

Name:Mario	Email: Email Me
Mainboard vendor: Intel	Mainboard model: D945PVS

Comments:
I've tested the trial version for a couple of days then purchased a license because I find Hmonitor useful for my needs, compact and drain very few system resource. The author added full support for my Intel D945PVS board in 1/2 day!

Tuesday, March 29, 2005 at 14:53:48 (CST)

Name:Thomas	Email: Email Me
Mainboard vendor:Acer	Mainboard model:Ferrari 3000

Comments:
Great! It didn't work with my board but the author has quickly released a new beta including my board, thanks a lot!

Wednesday, February 16, 2005 at 13:57:35 (CST)

Name: Mr Slowhand	Email: Email Me
Mainboard vendor: MICRO-STAR	Mainboard model: MS-7061

Comments:
Great software. I've been searching a long time now. But this is it! Thanx again!

Tuesday, October 26, 2004 at 22:52:12 (CDT)

Name: stinger30au	Email: Email Me
Mainboard vendor: MSI	Mainboard model: p4m266

Comments:
Great Software. If you own a pentium 4, 3Ghz or above, run any CPU-heavy application and watch your CPU temp rocket and your Power supply voltages drop! This hardware monitor helped me locate a few PC's with dud power supplys! LOVE IT! keep it up

Wednesday, October 20, 2004 at 12:01:27 (CDT)

Name: Heinz-Juergen Fischer	Email: Email Me
Mainboard vendor: FSC (Fujitsu-Siemens)	Mainboard model: D1683-Intel875P/Hermes

Comments:
Seems to be the only monitor working with this board. Thanks a lot!

Friday, April 09, 2004 at 08:28:02 (EDT)

Name: John Butler	Email: Email Me
Mainboard vendor: Gigabyte	Mainboard model: 8PENXP Dual 3.2

Comments:
Hmonitor is a very good tool for fast PC's, especially useful for users with high-end P4 processors which heatup rapidly as their workload increases. The thermo control allows the CPU speed to be throttled at a selected maximum temperature and gives valuable protection against overheating and excessive fan noise. On the downside, the registration/activation process could be simpler. Nevertheless, I strongly recommend Hmonitor to all users of Gigabyte motherboards: it works well with Gigabytes new "3D Cooler Pro".

Wednesday, March 24, 2004 at 06:05:44 (CST)

Name: Jens Weiermann	Email: Email Me	URL: Visit Me
Mainboard vendor: Fujitsu Siemens	Mainboard model: D1627

Comments:
I wanted to let you know about the fantastic job Alexander did! I registered HMonitor without checking the compatibility with my board first (ok, my fault!) We wrote several mails, I ran some test apps and Alexander created a new version of HMonitor which supported my board THE SAME DAY! Well worth the money spend...

Friday, August 29, 2003 at 18:11:25 (EST)

Name: Jean-Patrice Herault	Email: Email Me
Mainboard vendor: DFI	Mainboard model: AD75

Comments:
I want to emphasize that, thanks to Hmonitor 4.1, I have avoided a big loss of very important data. The high temperature of my hard drive was an effective defect which certainly directly leaded to the definitive failure of the drive. The information given by Hmonitor 4.1 allowed me to give a solution to the problem before the disaster. Thanks again and congratulations for your so useful tool!

Thursday, August 29, 2002 at 10:09:28 (EST)

Name: David Zielezna	Email: Email Me
Mainboard vendor: Abit	Mainboard model: VP6

Comments:
Works very well under XP with my hardware. Does everything I need it to. Keeps an eye on both of my CPU's(pair of PIII 850's), as well as my Asus V8200 Deluxe VGA card. Combining the logging and alert features also allow me to know the status of my machine remotely. I have written a few small applications that with the aid of these features allow me to monitor the status of my machine by telnet, and also have my pc email me with any alerts.
I recommend this software without hesitation, and the registration fee is a modest price to pay for software with this functionality.

Sunday, June 23, 2002 at 14:35:24 (EDT)

Name: Hans Gruber	Email: Email Me
Mainboard vendor: Tyan	Mainboard model: Trinity 410

Comments:
Great product! I actually registered this one :) - good show!

Monday, April 15, 2002 at 15:02:45 (EDT)

Name: Yair	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
WOW , This Program IS BEST! My Temp was at 65C And Now its on 40 On My Amd 1400 Athlon! Amazing , thanks for that AWESOME SOFTWARE ;)

Friday, March 15, 2002 at 14:09:22 (EST)

Name: Robbert	Email: Email Me
Mainboard vendor: Gigabyte	Mainboard model: GA-7DXR

Comments:
Using the AMD 1800+ XP Processor in a reasonable warm enviroment I had a cooling problem. Installed HSM and enabled the "CPU Low Power" mode. My temp dropped from around the 65°C to 45 to 50°C.... I really like to know how that works... The temp stays low... Great! Thanx for this piece of fine software.

Tuesday, December 04, 2001 at 07:58:35 (EDT)

Name:Adrian Roziewski	Email: Email Me
Mainboard vendor:Asus	Mainboard model:A7V

Comments:
I tried Asus PC Probe and Motherboard Monitor. Both didn't have the CPU idling (HLT) feature, so they're useless to me. I tried the demo of HMonitor 4.0.3.1 Pro and it worked awesome. After my trial expired, I bought the license and it was worth every penny. My T-Bird 1.2 GHz (200 MHz) CPU now runs around 36.5'C now thanks to HMonitor 4.0.3.1 Pro and my motherboards chipset runs around 28.0'C. Most Excellent program. I look forward to updates!

Tuesday, October 09, 2001 at 15:45:49 (EDT)

Name: Doppelwhopper	Email: Email Me
Mainboard vendor: Abit	Mainboard model: KT7-RAID

Comments:
the program I searched for about 2 years is found now!!! a program, which shows me the temperature of my cpu in the task bar and throttles my system down if it's getting to hot!! GOOD WORK GUYS!!!

Tuesday, July 03, 2001 at 03:05:57 (PDT)

Name: Jaakko Paavilainen	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
This is the best program for checking you temperatures, fan speeds etc. Runs great for my TB 700@809. Didnt even have to make temperature corrections.

Thursday, May 31, 2001 at 13:10:35 (PDT)

Name: Dorin Cengher	Email: Email Me
Mainboard vendor: DFI	Mainboard model: AK75-EC

Comments:
HMonitor version 4 works great on VIA KT133A (northbridge) and 686B (southbridge) platforms. To be precise, mine is a DFI AK75-EC mobo, Athlon Tbird AXIA 1.2Gb 133/266 MHz FSB Slightly overclocked through FSB increase to 140/280 from 133/266, CPU internal clock being 1260 MHz (9 x 140). After installing HMonitor 4, CPU temperature dropped from 47-48 Celsius to 30-31 Celsius! My new mobo came with VIA's latest Hardware Monitor (version 2.04), a program with no utility whatsoever except just reading CPU/system temperatures and fan speeds. I wonder why don't Alexander's AB Software get together with a leading chipset maker (like VIA) to put up a really nifty hardware monitoring and temperature controlling program to be shipped all over the world with the respective chipset. A whole world would be thankful to such a move!

Tuesday, May 22, 2001 at 09:26:56 (PDT)

Name: Victor	Email: Email Me
Mainboard vendor: Epox	Mainboard model: EP-8KTA3+

Comments:
Runs great. Now I don't have to reset and go to the BIOS to check the tempeture. I have been using the Hmonitor with an AMD Duron 700MHz, when I knew the tempeture during heavy processing (48C) I decide to improve the cooling and now it runs at 38C. A "must have" program.

Monday, May 21, 2001 at 23:27:39 (PDT)

Name: David Stanley	Email: Email Me
Mainboard vendor: Asustek	Mainboard model: A7V, AMD Athlon 1.2GHz

Comments:
Since installing Hmonitor, my BIOS reported temps have dropped two degrees for the motherboard to 27 degrees C and my processor has dropped 17 degrees C to 35 C! What a difference. These changes are with the default settings. I will be telling my friends about your software and highly recommending it to them. Also you have some very good tech support.

Saturday, January 20, 2001 at 19:51:34 (PST)

Name: Matt Rocker	Email: Email Me
Mainboard vendor: GigaByte	Mainboard model: GA-7DXC

Comments:
Awesome product, I have an AMD 1200MHz and it gets hot, and this program is great for watching it.

Wednesday, January 10, 2001 at 13:26:08 (PST)

Name: John Whittingham	Email: Email Me
Mainboard vendor: DFI/TMC	Mainboard model: K6XV3+

Comments:
Using a K6/2 300 AMD processor the CPU temperature needed 8C degrees adjustment to be correct. It's running cool!

Saturday, December 30, 2000 at 07:15:53 (PST)

Name: Dorin Cengher	Email: Email Me
Mainboard vendor: DFI	Mainboard model: P5BV3+ Rev.B+ (Socket/Super7)

Comments:
I have been using the shareware version of HmonitorPro 3.2.3.1 for a few days and I am very pleased with the performance of your program. Although not specified in your Supported Motherboards List, HmonitorPro automatically detected my MB sensor as GL518SM, so I think you can safely include P5BV3+ (as well as all DFI's Socket/Super7 motherboards I should think) in your MB list under DFI section. Anyway, I think your program is absolutely wonderful and please accept my congratulations and appreciation.
Have a great New Year 2001!
Dorin Cengher (Bucharest, Romania)

Sunday, December 17, 2000 at 03:28:55 (PST)

Name: Mike Laws	Email: Email Me
Mainboard vendor: ASUS	Mainboard model: AK74-SC/SU Rev. A+

Comments:
I have just registered my copy of your Monitor Pro software. I have found it invaluable in tracking the temp's in the CPU. I am running an AMD Duron 700 and it gave all sorts of trouble right from the first time we fired it up. The dealer has now supplied a new CPU, Heatsink and Fan and installed the monitor software. I have found that the CPU is quite sensitive to ambient temp and commonly runs at or near 50Deg C when the ambient temp is in the 35-38Deg C range. The system starts to hang when the CPU hits 50Deg. The room temp is currently about 25Deg C and it is running at 47Deg. I will be fitting another exhaust fan to the case over Christmas, and if it still runs on the hot side I will fit a slot fan directed at the heatsink. Happy Christmas to all at Hmonitor. Mike Laws. Adelaide. Australia.

Friday, December 01, 2000 at 08:58:14 (PST)

Name: Jacky	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
It can become a real kick ass utility if you could add a fan throttling function. When the CPU is above X°, the fan must spin 100%, under Y° the fan can be reduced by 50% or stopped. I know a little prog for my BP6 board but not for the others (Abit VT6X4 for example). Thank you, good work !

Tuesday, November 28, 2000 at 20:45:46 (PST)

Name: Bob Trautman	Email: Email Me
Mainboard vendor: Soya	Mainboard model: K7via

Comments:
Works like a champ.

Monday, October 30, 2000 at 02:32:22 (PST)

Name: Funky-Disco_Man	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B

Comments:
Works just the way you want it to.

Sunday, October 01, 2000 at 10:47:10 (PDT)

Name: Ing. Philippe Mousset	Email: Email Me	URL: Visit Me
Mainboard vendor: MSI	Mainboard model: MS-6321 or 694D Pro

Comments:
This application works fine under WIN2000 on a dual processor mainboard. The best hardware monitor applet I know off!

Saturday, September 16, 2000 at 07:51:58 (PDT)

Name: Terry Hahn	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
A very good monitoring program for the internal components of a computer. Very satisfied with the way HMonitor keeps as eye on things for me. Thank you for help in this area.

Wednesday, August 30, 2000 at 15:14:31 (PDT)

Name: Ziggy	Email: Email Me
Mainboard vendor: Abit	Mainboard model: BP6

Comments:
Great little app. I use Win2k, and it worked good!

Friday, August 25, 2000 at 17:54:36 (PDT)

Name: Dave	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B-S

Comments:
GREAT program. Had it less than 24h, and I already registered it and took the scissors to my Intel LANDesk CD ROM. Neat, compact, accurate. Good stuff.

Tuesday, August 08, 2000 at 14:06:05 (PDT)

Name: Chuck Coty	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P3BF

Comments:
Great program. Keeps the heat down well with the halt function.

Wednesday, July 12, 2000 at 14:42:23 (PDT)

Name: Terry (SRXtreme)	Email: Email Me
Mainboard vendor: Asus P3V4X	Mainboard model: P3V4X

Comments:
Nice App! Compact TSR, Logging... Latest ASUS P3V4X with Asus V6600 monitor to got to remove not one but 2 mem hugs in on wack and gained features to. Used it on all my systems!

Wednesday, July 12, 2000 at 12:06:48 (PDT)

Name: Japser Yun	Email: Email Me
Mainboard vendor: elite	Mainboard model: p6bxt-a+

Comments:
Hi, i'm korean... 2byte language windows system(ex.japan,china,etc...) broken simbol mark (Celsius,Fahrenheit) just fix it plz. thanks for make cool program...

Wednesday, June 28, 2000 at 23:57:40 (PDT)

Name: Farzad	Email: Email Me
Mainboard vendor: Abit	Mainboard model: BE6 rev2

Comments:
Excellent monitoring utility. Thanks.

Sunday, June 04, 2000 at 10:07:07 (PDT)

Name: Dave	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B-B

Comments:
Excellent... the best monitoring utility out there, I think.

Friday, June 02, 2000 at 16:17:33 (PDT)

Name: Max	Email: Email Me
Mainboard vendor: Elitegroup	Mainboard model: P6VAP-A+

Comments:
I've tried 3 similiar programs, but currently my choice is HMonitor... pretty enough. works fine in Win2000.

Monday, May 15, 2000 at 02:22:10 (PDT)

Name: Paul	Email: Email Me
Mainboard vendor: Gigabyte	Mainboard model: GA6BXDS

Comments:
Excelent job on HMon Pro. Keep up the good work.

Thursday, April 13, 2000 at 13:48:37 (PDT)

Name: ginfest	Email: Email Me
Mainboard vendor: AsusTek	Mainboard model: P3V4X

Comments:
Thank you, your program is great, it's the only monitor for anyone using this board. AsusTek should pay you to package HMonitor with their boards, it's better than their "PC Probe"!

Saturday, April 08, 2000 at 11:49:35 (PDT)

Name: Mits	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B

Comments:
HMonitor is the best in the NT/2000 environment. My dream still remains CPU idling in NT not only when temperature rises, but also when CPU activity is high for prolonged periods. This additional method would suit all of us who do not have a temperature sensor for the CPU but only for the motherboard. However, still HMonitor is useful, since it allows to uncoditionally lower CPU speed whenever needed, and thus not crash. Keep up with the excellent work ! I hope some day my dream will come true :)

Thursday, April 06, 2000 at 17:03:35 (PDT)

Name: GaToR	Email: Email Me
Mainboard vendor: Abit	Mainboard model: BX6-2

Comments:
Hardware monitor ROCKS! This is the first hardware monitoring product that actually worked like I wanted it to. I am very satisfied with my purchase.

Friday, March 31, 2000 at 07:37:05 (PST)

Name: Scott Zigler	Email: Email Me
Mainboard vendor: Giga-Byte	Mainboard model: GA-7IX

Comments:
Hmonitor Pro works perfectly - reports the same values as the bios did. Recording data to a log file is very useful. The next step would be to add support of hardware monitored video cards, like my Asus V6800.

Thursday, March 30, 2000 at 15:55:31 (PST)

Name: Pål Bean	Email: Email Me
Mainboard vendor: Abit	Mainboard model: BH-6

Comments:
Well, works just Xellent with both the MB and CPU-sensor. Nice touch with the idle-cooling (like rain and cpu-idle). But how about implementing monitoring for graphic cards? ASUS v6x00 GeForce boards comes with a temp/fan monitoring tool, but it would be more convenient if it all were implemented in one application. -P

Monday, February 28, 2000 at 18:49:26 (PST)

Name: Norberto	Email: Email Me
Mainboard vendor: Roberto Lejona	Mainboard model: DFI P2XBL

Comments:
Lindo programa y funca en Windows 2000 final.

Friday, February 11, 2000 at 14:02:09 (PST)

Name: Jeff Stewart	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
I was looking for a program to monitor the temperature of a farm of NT web servers. HMonitor is just the thing! The run-as-a-service and exposure of the measurements via perfmon combine to make a great product.

Tuesday, January 04, 2000 at 06:05:33 (PST)

Name: S.P.Gschaider	Email: Email Me
Mainboard vendor: Gigabyte	Mainboard model: 7IX

Comments:
New Pro version runs great under WinNT 4.0 on my Athlon Board ! The first program that works 'out of the box'. Thanks very much for a really fine product.

Sunday, December 19, 1999 at 08:50:48 (PST)

Name: Carlos Urdaneta	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
Hi. I guess that you can make an OCX where the programmers can access this info an sell it. Please comment me about it. I have to monitor an a Industrial oriented product and is important to transmit the computer status to the monitor center in other place. Thanks, Carlos Urdaneta

Saturday, December 18, 1999 at 22:44:10 (PST)

Name: Neal	Email: Email Me
Mainboard vendor: ASUS	Mainboard model: BX440

Comments:
New Pro version runs great under Windows 2000, Beta 3 Release Candidate 3 (which is only 10 build off from the production version). Kudos to a fine product, and best of luck in the future!

Friday, December 10, 1999 at 12:28:51 (PST)

Name: Mits	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B

Comments:
I was familiar to cooling apps, and been a faithful user of Waterfall Pro for more than a year in Win98, since i overclocked my C300A to 450. However i was in a dead end now that I use NT2k (and i suppose NT4 overclockers have the same problem). In my humble opinion, HMonitor is the greatest utility not only because it implements HLT, but because it has found a way to throttle the CPU in NTx, a feature without which the concept of overclocking has no meaning: it is 100% certain that if i run a CPU intensive app i will crash in 5 or 10 minutes (I use no additional cooling/fans). In fact, throttling should be a standard feature of the kernel of all operating systems...

Tuesday, November 09, 1999 at 08:33:24 (PST)

Name: Coppermine	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P3B-F

Comments:
I feel much cooler! Is it possible to have versions of other languages?

Sunday, October 31, 1999 at 15:55:18 (PST)

Name: Yvan Poirier	Email: Email Me
Mainboard vendor:	Mainboard model: ABIT BX6-2 rev.2

Comments:
Best program ever had to keep a cpu COOL. Using a celeron 366 running at 645 rock solid. Could not have done it without this little program, specially over 550MHZ. Did reduced the heat by 10 degrees celcius. Nobody should be without it. It is worth its value 10 folds.

Saturday, October 02, 1999 at 02:04:00 (PDT)

Name: John Noble	Email: Email Me
Mainboard vendor: TMC	Mainboard model: TI5VG+

Comments:
An absolutely superb little program, and one which I do not mind paying the small price for. It does *exactly* what I want... I was worried that my K6-III 450 was overheating when running SETI (100% usage), and HMon proved this while letting me closely monitor the temperature. As a result I purchased cooling equipment from 3dcool.com (again, highly recommended - shipping to the UK in less than a week!!) and now my CPU is happy again. I like the peace of mind that this program provides. Well done...

Monday, September 27, 1999 at 13:50:57 (PDT)

Name: Sodda	Email: Email Me
Mainboard vendor:	Mainboard model:

Comments:
Here after please give y2k information about your product.

Sunday, September 19, 1999 at 05:01:31 (PDT)

Name: Matt	Email: Email Me
Mainboard vendor: Shuttle	Mainboard model: Hot591p

Comments:
Recently got an EISCA fan fitted with the GL518SM chip. I much prefer HMonitor to the Gensys utilitity as I can display the temp reading in the system tray. I have one suggestion however, the GL518SM doesn't directly support reading of voltages other than Vcore, however it is possible to do using interpolation (don't know how it works, but I can do it under Linux). Matt

Saturday, September 18, 1999 at 02:08:33 (PDT)

Name: wheelee	Email: Email Me
Mainboard vendor: PC Chips	Mainboard model: M726

Comments:
I was amazed that they supported this MB, got a 300A running @450. This SW really works! now I have to tell my friends about it. Thanks!

Sunday, September 12, 1999 at 13:53:42 (PDT)

Name: Larry Chapman	Email: Email Me
Mainboard vendor: Abit	Mainboard model: BE6

Comments:
Hmonitor Pro works great even though its not on the motherboard list. The Abit BE6 doesn't support the -5 voltage reading due to the use of a less expensive Winbond chip so the -5 voltage reading is erroneous in red. Hope the next update addresses this issue. So far this is the best mainboard monitoring APP I've found to date even with the -5 voltage issue.

Wednesday, July 21, 1999 at 07:44:51 (PDT)

Name: Joel Frese	Email: Email Me	URL: Visit Me
Mainboard vendor: Asus	Mainboard model: P2B-F

Comments:
Ok, what can I say? When I first used this software, I thought it was too good to be true. I didn't think the CPU would drop in temp THAT MUCH. But, it did. Its incredible. I have 2 working sensors on my CPU right now and its working great. Also, I have not noticed any problems with this program and my other programs. It seems to be well written. It also works EXTREMELY well coupled with a Peltier device. My OC Celeron 300A (450 @ 2.6v) is running as cool as a NON OC chip!

Monday, July 19, 1999 at 19:39:54 (PDT)

Name: Jared Frank	Email: Email Me
Mainboard vendor: Asus	Mainboard model: P2B-F

Comments:
This program is great! I like it better than the asus probe provided with my motherboard! Keep up the good work!

Saturday, July 03, 1999 at 09:52:33 (PDT)

Name: Ian George	Email: Email Me
Mainboard vendor:	Mainboard model: Abit BM6

Comments:
What a "cool" programme, got a celeron 466, clocked to 600, got a demo of your prog, saw the dangers of a hot chip, brought a big blue heatink not cool enough, put a case fan in, cool as ice, thanx for saving me a burnout,definatly now going to register!!

Saturday, June 05, 1999 at 14:22:28 (PDT)

Name: Mario Alid	Email: Email Me
Mainboard vendor: ASUS	Mainboard model: TX97XE

Comments:
Great program!!!. Will be avaiable an Internatitonal support languages, in Spanish?

Sunday, May 23, 1999 at 06:04:22 (PDT)

Name: Jerry	Email: Email Me
Mainboard vendor: Tyan	Mainboard model: S1846S/L/A Tsunami ATX

Comments:
I am using a pentium III at 500 mhz with the Tyan board indicated above and Win98

Monday, May 17, 1999 at 16:52:46 (PDT)

Name: Paul	Email: Email Me
Mainboard vendor: Various	Mainboard model: Various

Comments:
How about putting the MBLIST.TXT file online? I'd really like to see what boards are definitely supported before downloading, and I'd guess other people might too...

Friday, May 14, 1999 at 22:04:10 (PDT)

Name: Gavin	Email: Email Me	URL: Visit Me
Mainboard vendor: PC-Chips	Mainboard model: SiS-530

Comments:
This program is even better than my existing ADCM hardware monitor utility, I hope someday it'll fully support my mainboard(currently no CPU temp). ^_^

Saturday, April 10, 1999 at 22:17:47 (PDT)

Name: Robin Kimzey	Email: Email Me
Mainboard vendor: ABIT	Mainboard model: BH-6

Comments:
This program ROCKS!!! It runs like a champ when I do use Win98 but that is not often. Any chances of porting it to the BeOS? I think it would do great there! Thanx.

Tuesday, April 06, 1999 at 17:49:49 (PDT)

Name: Alex Black	Email: Email Me	URL: Visit Me
Mainboard vendor: Tyan	Mainboard model: S1696DLUA (Using 1 Intel PII-333mhz)

Comments:
The program works great. I get 3temp readings and 1 fan reading.. I entered the 15 degrees correction for my PII and it isnow 53 degrees.. sounds kinda hot! -alex

Tuesday, March 30, 1999 at 19:28:52 (PST)

Name: Ian Ball	Email: Email Me
Mainboard vendor: TekRam	Mainboard model: P6B40-A4X

Comments:
Way cool! But I can't see the CPU Temp... as per usual with this mb. :(

Friday, March 19, 1999 at 06:47:28 (PST)

Name: Tony Hasselhof	Email: Email Me
Mainboard vendor: Aopen	MB model: AX6B

Comments:
Finally a "cooler" that can read (some) of my MB settings, so throttling can be kicked in given a CPU temp. Well done, in the few hours I have played with this, all seems great! (was using Waterfall, but didn't support my MB sensors at all!).

Sunday, March 07, 1999 at 13:11:52 (PST)

Name: CJ Schmit	Email: Email Me
Mainboard vendor: Rise	MB model: R-657

Comments:
This program is great! I do alot of gaming with 3dfx and this keeps my system nice and cool with the Termo Control. I am running a PII 350 with 96MB of RAM. Keep up the great work!!

Monday, February 22, 1999 at 17:23:22 (PST)

Name: Joe P.	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
Great program! Easy to use, inexpensive and very customizable. It gave me the confidence to overclock my Celeron 300 to 450 w/o fear of frying the chip. Running solidly - Thanks

Thursday, February 11, 1999 at 10:16:51 (PST)

Name: Ron Schwing	Email: Email Me
Mainboard vendor: ABit	MB model: BH6

Comments:
Wonderfull program. Considering the fact I do QA for a living, this is defenitly a winner. Very expansive and flexible. Small and unobtrusive, yet acturate. The price is more than reasonable. Keep it up.

Friday, February 05, 1999 at 17:33:04 (EST)

Name: Sharon Ann Kaasa	Email: Email Me	URL: Visit Me
Mainboard vendor: Asus	MB model: TX97-XE

Comments:
I loved this program when it first became available for NT. I'm using the Pro version now on a TX97-E with Win98 and a IBM/Cyrix PPR233 with 75mHz bus and 3x. This is one of the finest programs I've seen. Great coding! Hoping one day for a Linux version :-))

Wednesday, February 03, 1999 at 19:01:30 (EST)

Name: quickSB	Email: Email Me
Mainboard vendor: Intel	MB model: pd440fx

Comments:
Wow - it actually works on my first generation Intel P-II board. Great coding! B of TeamB :)

Tuesday, February 02, 1999 at 07:04:41 (EST)

Name: Giorgio	Email: Email Me
Mainboard vendor: QDI	MB model: Brilliant I

Comments:
Very good utility. I hope someday it will work better with QDI motherboards

Thursday, January 28, 1999 at 22:21:32 (EST)

Name: Noel Mendez
Mainboard vendor: Tyan	MB model: 1832DL

Comments:
Bravo! Excellent work.

Comments:
I just thought I would let you know that you program is great. I tried a few other utilities like it and most of them didn't work and some of them even crashed my computer when I ran them. Your's works great! My motherboard is a BCM VP1541 with the Aladdin V chipset and a Winbond W83781D.

12/22/98 08:21:08

Name: Rich Lippert	Email: Email Me
Mainboard vendor: ABIT	MB model: BH6

Comments:
Just downloaded and set up your program. I have looked for a small program like this one for months. So far everything looks good. Thanks. Rich

12/10/98 11:02:59

Name: Chris Molstad	Email: Email Me
Mainboard vendor: Abit	MB model: BH6

Comments:
I really like Hardware Sensors monitor. It is a lot easier to use than Motherboard Monitor, and not nearly as bloated. Very accurate readings, also.

12/06/98 22:17:23

Name: Jean	My URL: Visit Me	Email: Email Me
Mainboard vendor: TYAN	MB model: S1836DLUAN Dual

Comments:
Great utility. Works well with the TYAN s1836DLUAN. Took a while to figure out that the 2 LM75s are at address 4 and 5, but still a very friendly program.

11/15/98 07:34:47

Name: toby
Mainboard vendor: ASUS	MB model: P5A

Comments:
Your program works for my P5A when the other two common ones did not sense my cpu temperature at all. Thanks for a fine program.

11/02/98 23:48:49

Name: Tomw Welsh	Email: Email Me
Mainboard vendor: Tyan	MB model: S1836 DLUAN Thunder 100 Pro

Comments:
Woohoo! Finally a proggie that can access my LM75s. This is SO much better than that evil Intel thing. I found that the correct setting for the first LM75 on the board is 4. Now, if i could only get the program to realize that the board has an LM79 no an LM78...

11/02/98 22:16:08

Name: Rob Koendering	Email: Email Me
Mainboard vendor: TYAN	MB model: S1830S

Comments:
Hmonitor is a great program. Good support when there are problems.

10/27/98 18:51:42

Name: John Timmany	Email: Email Me
Mainboard vendor: FIC	MB model: VB 601

Comments:
I think this is a great program. I was using Intel LDCM that came with my mother board. Too much for my needs. I appreciate your work.

10/26/98 21:42:08

Name: Terry	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
I am an avid overclocker, using a Pentium II 300 and running it at a rock solid 450. I wouldn't dream of doing this without your program HMONITOR. It has helped greatly in establishing what fans to use and experienting in which direction and location they should be. A top flight, low memory TSR!!!!

10/18/98 20:40:42

Name: Matt Hicks	My URL: Visit Me	Email: Email Me
Mainboard vendor: California Graphics	MB model: Photon 100

Comments:
This util kicks ass!! It works great.

10/17/98 18:05:34

Name: Steve Prentice	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
Great little prog!

10/13/98 22:56:06

Name: Stacey Witney	Email: Email Me
Mainboard vendor: QDI	MB model: Brilliant I

Comments:
Looks great... if only it would work with the LM80 (as used on QDI motherboards).

09/30/98 19:52:41

Name: Brigadier	My URL: Visit Me	Email: Email Me
Mainboard vendor: ABIT	MB model: BX6

Comments:
This hardware monitor is without a doubt the best. Keep up the good work man! I am still looking for extra sensor add ons for the LM79 chip so anyone who knows of this e-mail me

09/29/98 22:43:47

Name: Jean-M. Reis	Email: Email Me
Mainboard vendor: micronics	MB model: spitfire sm06p

Comments:
With Hmonitor I finally found a programm that monitored fan speed and temps of 2 CPUs correctly under NT . Many thanks to Alexander for his support in making Hmonitor work on my board.

09/14/98 20:18:26

Name: Tobias Schulze	My URL: Visit Me	Email: Email Me
Mainboard vendor: ASUS	MB model: TX97-LE

Comments:
Wow, thats the best monitoring program i have ever seen. I like most the small size and the easy handling. The Intel LanDesk for example is only big shit. I hope you will continue developing your cool program!

09/13/98 20:39:15

Name: Geoff Clark	My URL: Visit Me	Email: Email Me
Mainboard vendor: Asus	MB model: tx97-e

Comments:
I think this is a great program. Nice and small in size and has an easy to use interface. I especially like that it sits in the taskbar out of the way and I can view the temps of the mb and cpu just by putting the mouse over the icon.

09/09/98 18:20:34

Name: Jimmy Leon	Email: Email Me
Mainboard vendor: Intel	MB model: SE440BX

Comments:
I downloaded your utility after reading the rave reviews. It would be nice, if this motherboard were supported.
Thanks. Jimmy

09/07/98 07:59:38

Name: Charles Allred	Email: Email Me
Mainboard vendor: Intel	MB model: AL440LX

Comments:
This really is cool! Cpu utilization seems to be really good. I can't notice any difference whether HMonitor is running or not. The MB temp, fan speeds, and the voltages seem in line with what LanDesk (yuck) was reporting. So far so good!

09/01/98 16:26:37

Name: LIN,Yung-kuo	Email: Email Me
Mainboard vendor: Tyan	MB model: Thunder2 S1696Dual

Comments:
This is a great programm, better as LDCM. Thanks!!

08/30/98 20:26:46

Name: Stanley	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
You have wrote a great program to monitor the hardware. Very fast respond to feedback to come out with a new version. The individual adjustment for each of the three temp is great plus the setting of the label is just so cool.

08/29/98 09:58:25

Name: Didier Luthi	My URL: Visit Me	Email: Email Me
Mainboard vendor: NMC 5VMMX	MB model: NMC 5VMMX

Comments:
CPU and Motherboard temperature monitor run fine !!! Thanks to Alexander !!!

08/27/98 19:45:59

Name: Chris Cuthbert	Email: Email Me
Mainboard vendor: Shuttle	MB model: 571

Comments:
Hmonitor is the only program to work successfully on my Shuttle 571 motherboard. Alexander must be one of the fastest reacting programmers that I know! Thanks Alexander for a great program and assistance in getting it to work with my motherboard. I hig ly recommend this program for anyone running Windows 98. Thanks Alexander.

08/26/98 18:05:25

Name: David Stults	My URL: Visit Me	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
Just visiting to see how I like your program... the PC Probe provided with the P2B motherboard is a piece of trash.

08/25/98 20:00:08

Name: Brad Mettee	My URL: Visit Me	Email: Email Me
Mainboard vendor: FIC	MB model: VB-601

Comments:
works great, even matches the BIOS numbers!

08/25/98 01:14:24

Name: Braun Tacon	Email: Email Me
Mainboard vendor: Tyan	MB model: Tsunami 1846S/L

Comments:
Thanks! Just downloaded your latest and greatest. Finally, a monitor which detects my LM75! I tried your suggestion and set the address to 4. MOBO is Tyan Tsunamai with Landesk option. Model number is: S1846S/L Thanks again!!!! Braun Tacon

08/24/98 12:30:21

Name: Tom Simpson	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
Great Utility. Very nicely done. Thanks!

08/21/98 09:04:25

Name: Rene Anderes	My URL: Visit Me
Mainboard vendor: ASUS	MB model: P2L-b

Comments:
Great programm!

08/21/98 01:58:01

Name: John Maxwell	My URL: Visit Me	Email: Email Me
Mainboard vendor: ASUS	MB model: TX97

Comments:
Thanks for your efforts

08/17/98 06:37:05

Name: Hilton Travis	Email: Email Me
Mainboard vendor: ASUSTeK	MB model: P2B-LS

Comments:
Great little program. Beats PCProbe and LANdesk for tasks like monitoring voltages and temps!

08/14/98 05:23:00

Name: Phil Wright	Email: Email Me
Mainboard vendor: ASUS	MB model: P2B

Comments:
HMonitor is really a very good program. It beats the ASUS PC PROBE as I feel the info is easier to read and the program is much more compact. I also greatly appreciate your quick response to requests for change. As far as I am aware this is the only softw re available for ASUS boards that reads out all three temps. Heres to more features like temperature graphs and min / max readings.

08/14/98 01:19:29

Name: Christopher Golden	Email: Email Me
Mainboard vendor: Supermicro	MB model: P6DBE

Comments:
Your Hmonitor is great! Supermicro has their own SuperDoctor program that monitors much the same things, but its user interface is not particularly nice, and it takes up a lot of room. Having Hmonitor in the system tray, with vital stats available at a lance, is a real advantage. Thanks!

08/13/98 18:49:35

Name: Alex Rybinskiy	Email: Email Me
Mainboard vendor: EPoX	MB model: EP-58MVP3C-M

Comments:
Good program! Unfortunately, there is no OS/2 version...

08/12/98 12:37:22

Name: Walt	Email: Email Me
Mainboard vendor: SuperMicro	MB model: P6SBA

Comments:
Version 2.3.0.1 works great with the P6SBA MB. Your response in adjusting the program so that it would work correctly with this board was super. Thanks!